Panels all fitted

Finally finished all of the panels for now. I've left the battery tray and top tunnel panel till later for easy access. Had to make a few extra ally plates on the tunnel panels as the ally sheets from tiger were slightly too short. No big deal though. Sealed it all up this afternoon and mounted the brake pedal bracket to the floor.

I had a problem with the pedals back plate which the master cylinder bolts to. It is slightly too narrow to fit four bolts through so I have put 2 through for now and will get it welded in a week or two for extra strength, hence why the driver footwell panel has to cut-outs on it. A few photo's below of the panels finished and sealed.

Panels all finished

Holes for the master cylinder

Sealant applied

Drivers footwell panel with cutouts for the back plate to be welded to the chassis

All sealed and brake pedal bracket bolted on

Next job will be to weld the back plate to the chassis for the master cylinder and get the brake lines in.